www.RX7fb.com

since exterior is getting done to the final steps https://scontent-b-ord.xx.fbcdn.net/hphotos-frc3/969211_10201814412913825_2074949307_n.jpg https://scontent-b-ord.xx.fbcdn.net/hphotos-prn1/993745_10201814416873924_37287795_n.jpg https://scontent-b-ord.xx.fbcdn.net/hphotos-prn1/1391885_1020181441655...

accomplished a few things today, new rear wheel cylinders so I could put the brakes back on, new clutch master cylinder got installed and bled, filled the rear diff 50/50 castrol synthetic 80w90 and 1 quart Lucas synthetic, and finally got her off the stands and back on the ground! https://scontent-...

Ian
battery-
us spec- g60-5
capacity-45 amp
12v
alternator-
55a 12v
14v@2500rpm 40amp under load
14v@1100rpm 0amp no load
hope it helps

so I'm seriously not liking the air cleaner on the car....and I have a megasquirt pnp for a s5 t2....so y no get a 4bbl->gm tbi, drop in a 2nd gen cas, run the 6al's on the 2nd gen coils and FI Cricket?

after looking at ur fer a bit i believe the 2 posts are doing same thing....generating a countable pulse....

0-0 Ian https://scontent-b-ord.xx.fbcdn.net/hphotos-ash4/1239430_10201465834119573_598023570_n.jpg https://scontent-b-ord.xx.fbcdn.net/hphotos-prn2/1235507_10201465836239626_1669091520_n.jpg https://scontent-b-ord.xx.fbcdn.net/hphotos-prn2/1236435_10201465837719663_653538444_n.jpg https://scontent-a...

what do you need Ian? I have a spare s3 cluster that has sun damage to the faces, so if you need i can open it up and check the speedo. I do know that PAS was optional on s2 & s3 GS trim and above, and that every US bound car was wired for it (dealers installed most options) went out and remove...

what do you need Ian? I have a spare s3 cluster that has sun damage to the faces, so if you need i can open it up and check the speedo. I do know that PAS was optional on s2 & s3 GS trim and above, and that every US bound car was wired for it (dealers installed most options)

after finding "rust sprouts" under the factory paint on the hood I spent the better part of the day today sanding.....then removed the hood, ospho till the painters ready to seal it...then work out the little stuff. so I snapped a few of the engine bay of how its currently running (starts ...

update! I decided to take the easy route, well less time consuming route...I swapped my ring gear onto the torsen https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/66160_10201446346912405_1691991891_n.jpg the 4.10 rear isnt really a gain when compared to 3.90...no speedo error w/ stock height t...