KIMI 2 - 1983 Series 2

Restoring, modifying, fettling or just enjoying your RX7 ? Share it with us here...
User avatar
Casey
Admin
Admin
Posts: 1337
Joined: Sat May 07, 2011 5:46 pm
Location: Colchester, UK
Has thanked: 512 times
Been thanked: 455 times

Re: KIMI 2 - 1983 Series 2

Post by Casey »

KIMI 2's MOT is due shortly, so I thought I'd have a bit of a poke around before booking her in and found about 5mm of vertical play in the steering idler :o . I took the mounting bracket off and found a few pieces of disintegrated bush, but most had disappeared :oops:

Searching through this forum I saw that Ian65 had recommended the SuperPro Poly bush so I've just ordered a set for £13.31 delivered off ebay (TDC Automotive). They should arrive later in the week so I can reassemble the idler and book the MOT!
KIMI 1 : 1st Gen, "hybrid" 1983 silver S2 running gear in a 1985 S3 shell, SORN'd, long term resto project
KIMI 2 : 1st Gen, 1983 silver S2 - now sold to Ian Mothersole on here.
KIMI 3 : 1st Gen, 1983 red S3
Plus a 2004 Full Bridgeported RX-8
User avatar
Casey
Admin
Admin
Posts: 1337
Joined: Sat May 07, 2011 5:46 pm
Location: Colchester, UK
Has thanked: 512 times
Been thanked: 455 times

Re: KIMI 2 - 1983 Series 2

Post by Casey »

Whilst poking around, I also spotted the passenger side oil cooler bracket that mounts it below the radiator had failed. I decided the best option was to construct a new bracket. Works a treat!

New bracket and failed original:

Image
KIMI 1 : 1st Gen, "hybrid" 1983 silver S2 running gear in a 1985 S3 shell, SORN'd, long term resto project
KIMI 2 : 1st Gen, 1983 silver S2 - now sold to Ian Mothersole on here.
KIMI 3 : 1st Gen, 1983 red S3
Plus a 2004 Full Bridgeported RX-8
User avatar
Casey
Admin
Admin
Posts: 1337
Joined: Sat May 07, 2011 5:46 pm
Location: Colchester, UK
Has thanked: 512 times
Been thanked: 455 times

Re: KIMI 2 - 1983 Series 2

Post by Casey »

Waiting for SuperPro poly bushes to arrive for steering idler, so decided to clean up the bracket and give it the full POR15 treatment. A small thing, but very satisfying :)

I will use some superfine wet'n'dry paper to clean the bore of some slight surface rust just before greasing it it up.

Image
KIMI 1 : 1st Gen, "hybrid" 1983 silver S2 running gear in a 1985 S3 shell, SORN'd, long term resto project
KIMI 2 : 1st Gen, 1983 silver S2 - now sold to Ian Mothersole on here.
KIMI 3 : 1st Gen, 1983 red S3
Plus a 2004 Full Bridgeported RX-8
KiwiDave
VIP User
VIP User
Posts: 2268
Joined: Sat Nov 05, 2011 8:07 pm
Location: Feltham, Southwest London
Has thanked: 482 times
Been thanked: 192 times

Re: KIMI 2 - 1983 Series 2

Post by KiwiDave »

Nice work ... Inspirational th:
1985 Sunrise Red S3 TWR
2006 Mercedes CLK 280 Sport AMG
User avatar
Hobbawobba
VIP User
VIP User
Posts: 1948
Joined: Tue Nov 01, 2011 9:44 pm
Location: Worcester - UK
Has thanked: 629 times
Been thanked: 222 times

Re: KIMI 2 - 1983 Series 2

Post by Hobbawobba »

Everything is looking pretty clean aye! I'm liking the calipers :D . Bigg Red are just across the road from me pretty much :lol:
User avatar
Casey
Admin
Admin
Posts: 1337
Joined: Sat May 07, 2011 5:46 pm
Location: Colchester, UK
Has thanked: 512 times
Been thanked: 455 times

Re: KIMI 2 - 1983 Series 2

Post by Casey »

Thanks guys, always more to do with these cars though :D

Polybushes arrived last week:
Image

Now fitted, with fresh bracket fixing bolts/nuts:
Image

That's improved the steering somewhat ;)

Pleased also that all the "major/not nice" clunking/rattling noises have finally abated and she drives fine again now.

She's now booked in for her MoT next Tuesday - fingers crossed!
KIMI 1 : 1st Gen, "hybrid" 1983 silver S2 running gear in a 1985 S3 shell, SORN'd, long term resto project
KIMI 2 : 1st Gen, 1983 silver S2 - now sold to Ian Mothersole on here.
KIMI 3 : 1st Gen, 1983 red S3
Plus a 2004 Full Bridgeported RX-8
User avatar
DKWW2000
VIP User
VIP User
Posts: 1625
Joined: Sun Jul 06, 2014 10:16 pm
Location: English Riviera - South Devon
Has thanked: 183 times
Been thanked: 188 times

Re: KIMI 2 - 1983 Series 2

Post by DKWW2000 »

Looks good, it will pass fine with all that nice new paintwork :lol:
RX7 FB S3 - RX7 FC TII Vert
Rotaries Previously Owned:-
2 x NSU Ro 80s - 2 x S2 RX7s - Suzuki RE 5 - DKW(Hercules) W2000 - Norton (Krauser) Commander
User avatar
Casey
Admin
Admin
Posts: 1337
Joined: Sat May 07, 2011 5:46 pm
Location: Colchester, UK
Has thanked: 512 times
Been thanked: 455 times

Re: KIMI 2 - 1983 Series 2

Post by Casey »

Gratuitous few pics - cleaned her to dazzle the MOT man and make sure she looks well looked after :D

The photos do flatter - the paintwork needs attention in a lot of places!

MoT is next Tuesday - not Monday as I stated above :oops:

Image

Image

Image

Image
KIMI 1 : 1st Gen, "hybrid" 1983 silver S2 running gear in a 1985 S3 shell, SORN'd, long term resto project
KIMI 2 : 1st Gen, 1983 silver S2 - now sold to Ian Mothersole on here.
KIMI 3 : 1st Gen, 1983 red S3
Plus a 2004 Full Bridgeported RX-8
User avatar
A7RXY
VIP User
VIP User
Posts: 1343
Joined: Fri Apr 01, 2011 6:55 am
Location: Upminster, Essex UK
Has thanked: 158 times
Been thanked: 61 times

Re: KIMI 2 - 1983 Series 2

Post by A7RXY »

Casey looking good, silver does scrub up well.

Dibs
User avatar
Hobbawobba
VIP User
VIP User
Posts: 1948
Joined: Tue Nov 01, 2011 9:44 pm
Location: Worcester - UK
Has thanked: 629 times
Been thanked: 222 times

Re: KIMI 2 - 1983 Series 2

Post by Hobbawobba »

Oooo h[b[
Post Reply

Return to “RX7 Rides and projects”