84GSLSE 13BREW Swap build

[DWNUNDR]

Might actually work out..

Before and after por15

19D256CC-7017-451C-858E-7248B00781C2.jpeg (251.24 KiB) Viewed 16117 times

[ian65]

Wow, that's come up really well

[DWNUNDR]

I spoke to early.. it failed.. sections started peeling and now I dont feel confident or want to risk running it..

So I am going to try again with the better tank thats is in the car currently.. but I will try electrolysis first, then go thru the por15kit.. I watched Aaroncakes video and after I realized it failed cause I rushed it...

[Hobbawobba]

Ahh yeah. POR15 is very specific about how it needs to be done for it to work properly aye. Fingers crossed this next attempt works out

[DWNUNDR]

Tank attempt 2.. changed the pot design... I made a test box to test the magnifier I got as my eyes suck short distance now being mid 40...

It worked.. I could see the puddle.. so I purged the tank and welded.. let it sit for 4plus hrs.. not one weep or drip...

Also patched the holes on my exhaust manifold as I am moving the wastegate outlets more inline with the exhaust outlets...

1BDEF1C5-C475-4B8C-81BA-C3C062AC3C15.jpeg (158.48 KiB) Viewed 16056 times

EBB6BDBF-3419-4CC3-AC73-8367C41A28F9.jpeg (112.12 KiB) Viewed 16056 times

EE0E7DD9-D95A-4BE4-BE23-7012FE3F7BD6.jpeg (321.36 KiB) Viewed 16056 times

D633A7BB-9051-49D0-BFDA-BE93F430756D.jpeg (183.64 KiB) Viewed 16056 times

594D9925-8773-48D9-838E-BAB2FE7CCB7E.jpeg (328.63 KiB) Viewed 16056 times

8E48693B-1F06-452B-9608-CFB40C8669D4.jpeg (315.74 KiB) Viewed 16056 times

DAF4C722-3D4B-4829-972A-D24241706203.jpeg (180.84 KiB) Viewed 16056 times

[DWNUNDR]

FDD71779-15AA-4081-B7D1-4F151F649A9F.jpeg (263.37 KiB) Viewed 16266 times

Also the tank I had in the car was mint so I may not even seal it

[spirit r]

Tank attempt 2.. changed the pot design... I made a test box to test the magnifier in 6jpeg8E48693B-1F06-452B-9608-CFB40C8669D4.jpegDAF4C722-3D4B-4829-972A-D24241706203.jpeg

Should be good having a drain plug, getting out the mud was building in that sump!

[DWNUNDR]

Motor is back in

Gas tank is in

4BAD583D-12DD-4536-A020-DEBA1A4366EF.jpeg (366.75 KiB) Viewed 16232 times

525472DD-2238-4074-AC3B-6F6EAA7A1EFA.jpeg (271.4 KiB) Viewed 16232 times

65B00605-A763-4ED8-A3A5-866ECDEFAEFC.jpeg (287.5 KiB) Viewed 16232 times

[DWNUNDR]

trying to get done for my first car show on June 14th... currently working on the exhaust manifold modifications - cut the existing wastegate pipes off and am repositioning them in a more direct flow with the exhaust ports to try to eliminate some boost creep we were getting on the last motor..

PIA.. hahaha

Water-Meth setup should arrive today so then I have to install that as well...

[DWNUNDR]

Got the exhaust manifold done and in.. everything I welded screwed the next thing in the line up... haha so pretty much redid the whole wastegate setup almost

393BF4C4-C46C-4CFA-92C5-9715CB762C15.jpeg (236.28 KiB) Viewed 16189 times

99700AEB-4BA0-4290-BBE6-396FCB593712.jpeg (145.28 KiB) Viewed 16189 times

343C8015-BF50-4919-8D57-AD7BD0963B88.jpeg (154.13 KiB) Viewed 16189 times

F804500C-B2CF-481A-9A99-3B4B191C84A8.jpeg (250.4 KiB) Viewed 16189 times

B70A5EAC-ADF0-40D2-9AAD-48C5F887E254.jpeg (176.7 KiB) Viewed 16189 times

DE1AF83A-ECD0-4337-B8BF-7B87713BC9B7.jpeg (262.65 KiB) Viewed 16189 times