Aussie S2 for nav trials

[aarc240]

The yellow monster is slowly getting there.
Here's an example why the wiring system upgrade took some 30 hours more than it should have (and I found this sort of thing in more places than I could credit).
I hope no-one else finds anything like this.
Amazing, the auto electrician who worked on the car actually left his business card in the glove box!!

[codge]

Shocking!

[Hobbawobba]

WOW

[aarc240]

It's been lomg getting this done but som update pics from early
Sensor and sensor mount in front caliper plate.

sensor mount.jpg (60.12 KiB) Viewed 51119 times

sensor.JPG (67.12 KiB) Viewed 51119 times

and the first version of the disc inside the front hub, steel inserts in aluminium plate

disc.JPG (62.17 KiB) Viewed 51119 times

which proved to be totally unsuccessful!
Email to Brantz got the needed info, turns out their sensor also detects aluminium
The sensor needs 14mm or wider metal target, preferably iron.
Unfortunately no pic of final version but changed to plain steel plate with 9 holes 14mm diameter, so about 15.9mm between holes
Now works and Brantz are updating their docos to give better info.

[aarc240]

And in case we ever roll the car

cage1.JPG (61.28 KiB) Viewed 51119 times

cage2.JPG (60.71 KiB) Viewed 51119 times

cage3.JPG (60.94 KiB) Viewed 51119 times

[aarc240]

Dash as seen by driver

dash1.JPG (63.12 KiB) Viewed 51119 times

by navigator

dash2.JPG (71.25 KiB) Viewed 51119 times

dash3.JPG (77.85 KiB) Viewed 51119 times

the funny little black thing on the centre top of dash is an electronic compass.
Yes the shift knob is a bright yellow ball, much easier to use on a dark night in the middle of nowhere

[aarc240]

Protection against floor heat for the driver

foot1.JPG (70.64 KiB) Viewed 51118 times

Yes the doors are off yet another ed car

And to give the nav something to push on when it's one of those "oh, oh oohhh!!!" moments

foot2.JPG (59.03 KiB) Viewed 51118 times

The grey thing is a foot switch for zeroing the intermediate distance on the trip meter

[aarc240]

These were when I was modifying the dash.

makingdash2.JPG (65.36 KiB) Viewed 51118 times

makingdash1.JPG (77.17 KiB) Viewed 51118 times

The housing over the trip meter and clock is constructed with 1mm thick ABS plastic sheet (styrene) and covered with sprayed on impact foam.
The meters sre mounted on a concertina fold aluminium bracket from the upper steel area of the original dash shell so it will collapse if ever impated.

[aarc240]

The front wheel sensor disc

sensor disc.jpg (123.99 KiB) Viewed 50416 times

[aarc240]

Dang, just realised how long it's been since I gave anyone more stuff !


Here is the car as roaded.