Limited Slip Diff

[Brett]

Looks like i can confirm that the Montrose rear end is roughly the same as a S1 Rx7.... so, where does that leave me?

[kiwimazda]

Swapping the whole lot out and putting in a S3 giving you discs on the rear and the use of Honda S2000 ratios

[Brett]

Got my eye on a S3 rear end courtesy of this forum
Also Mr Ramon gave me a few suggestions, (and a massive surge of jealousy) on Saturday morning

The flying turn will run this year, even if I have to walk it up the strip!

[Brett]

Hmmmm, starting to run out of time before God of The Pod/Rotorstock... any ideas what will fit in an S1 housing?

[TOOL]

Hmmmm, starting to run out of time before God of The Pod/Rotorstock... any ideas what will fit in an S1 housing?

[Brett]

Was that a "re-read the thread" because I've missed something obvious?

[TOOL]

Yes. Your question was answered on Exile. You need a 24 spline diff.

Everything you want to know is here: http://www.ausrotary.com/viewtopic.php?f=16&t=2695

[Brett]

Yes. Your question was answered on Exile. You need a 24 spline diff.

Everything you want to know is here: http://www.ausrotary.com/viewtopic.php?f=16&t=2695

I must be bloody blind - I only just noticed your reply on there!

Thanks for the link

[TOOL]

24 spline LSD with a 4.11 ratio for sale:

http://www.ausrotary.com/viewtopic.php?f=48&t=222409

£500 plus delivery from Oz

[ian65]

24 spline LSD with a 4.11 ratio for sale:

http://www.ausrotary.com/viewtopic.php?f=48&t=222409

£500 plus delivery from Oz

another 500 quid then