Page 2 of 3
Re: FC Calipers on S3 Discs & Hubs
Posted: Tue Oct 16, 2012 12:40 pm
by BO0557
I do have a set of the RE Speed brackets that i bought years ago..
Alls you need then is FC hubs and FC disc if you thinking of going that way.. Worse case if you want to keep 4 stud - get some GSLE front hubs which are 4x114 and get some 15" wheels in 4 stud
Re: FC Calipers on S3 Discs & Hubs
Posted: Wed Oct 17, 2012 9:37 pm
by DB RX63
OK Chaps,
So has anyone got a pair of FC hubs and s/h discs that I can play with ?
Re: FC Calipers on S3 Discs & Hubs
Posted: Wed Oct 17, 2012 9:51 pm
by DB RX63
Some old FC pads would be handy too......
Re: FC Calipers on S3 Discs & Hubs
Posted: Thu Oct 18, 2012 11:00 am
by BO0557
ive got the old front discs of mine - still in very good condition i was actually going to throw them out this weekend but if you want them they are yours..
Re: FC Calipers on S3 Discs & Hubs
Posted: Thu Oct 18, 2012 8:58 pm
by DB RX63
Cheers Damon, keep hold of em, I'll pick em up at some point.
Re: FC Calipers on S3 Discs & Hubs
Posted: Sat Jul 27, 2013 4:55 pm
by spirit r
I know the thread is old but I want to know if this part is working with the Rx7 FB 4x114,3mm Watanabe wheel 8,5x16 ET-6mm + FC/FD RX7 BRAKE CALIPER
http://www.ebay.com/itm/AE86-FRONT-BIG- ... cb&vxp=mtr
- $T2eC16JHJIYE9qUcNbUqBRpZFZlsr!~~60_57.JPG (565.38 KiB) Viewed 3759 times
Thomas
Re: FC Calipers on S3 Discs & Hubs
Posted: Sat Jul 27, 2013 8:55 pm
by TOOL
I doubt it will fit the RX7 strut.
You can buy these from REsoeed in the States but Billy doesn't seem to work there now and the service is terrible I've heard.
I've got the dimensions/drawings for making these to suit RX2/RX3 and you can modify to suit your strut. Any good?
Re: FC Calipers on S3 Discs & Hubs
Posted: Sun Oct 13, 2013 7:06 pm
by spirit r
TOOL wrote:I doubt it will fit the RX7 strut.
You can buy these from REsoeed in the States but Billy doesn't seem to work there now and the service is terrible I've heard.
I've got the dimensions/drawings for making these to suit RX2/RX3 and you can modify to suit your strut. Any good?
What do you think about these:
http://trsmotorsport.com/index.php?opti ... &Itemid=26
Re: FC Calipers on S3 Discs & Hubs
Posted: Sun Oct 13, 2013 11:28 pm
by TOOL
I think they're expensive.
Discs are plentiful. Calipers are easily available second hand too and you can buy rebuild kits.
The only part you really need is the bracket.
RESpeed used to do brackets for S3 RX7. Try and track some down on RX7club.com
Re: FC Calipers on S3 Discs & Hubs
Posted: Tue Oct 15, 2013 7:04 pm
by spirit r
TOOL wrote:I think they're expensive.
Respeed 199$ only 4 parts
- fbbig.jpg (34.83 KiB) Viewed 3614 times
Theracingstore: 625$ all inclusive parts
Billet Aluminum Four Piston Calipers
Billet Aluminum Hubs with screw in dust caps
Billet Aluminum Mounting Brackets
10 1/4 Diameter 5/16 Thick Drilled Rotors
Grade 8 Hardware
1/2 x 3" long screw in wheel studs
Wheel Bearings
Grease seals
Hawk Performance Brake Pads
Meets All NHRA / IHRA Requirements
- DSC_36671-408x612.jpg (107.92 KiB) Viewed 3614 times
- DSC_3692-300x199.jpg (26.17 KiB) Viewed 3614 times