www.RX7fb.com

Posted: **Mon Sep 16, 2019 6:08 pm**

thats what the lights are for hahah

the only real one to watch is the wideband...

Posted: **Thu Sep 26, 2019 6:00 pm**

gotten to do a few car shows recently.. the best one yet was finally having my 3 mates all have our cars running on the same day together.. haha

: 70975868_10156783242242921_1971983239811694592_o.jpg (155.72 KiB) Viewed 6430 times

Posted: **Thu Oct 03, 2019 2:06 am**

next up as we head into winter months... Ford 31spline 8.8 rear end... in the process of stripping it down, chipping off the rust flaking, cleaning it up, then I will shorten it to fit... trying to decide the route for brakes etc... part of me as a machinist wants to make all my own stuff... I need all the brackets for suspension remade and welded, custom caliper brackets made to run stock brakes... grannys speed shop over here does these rears, they also sell all the stuff I need... would cost me around $600 to have all the parts for me to just weld it on... but I am replacing the ebay intercooler that came with the motor for a Treadstone one, and refitting my radiator back to normal upright, and upgrading the fans.. so the less money I throw out the better...

: 71892913_10156807096482921_5358349598752505856_n.jpg (204.59 KiB) Viewed 6397 times

: 71142181_10156807096547921_6205844592982491136_n.jpg (106.55 KiB) Viewed 6397 times

: 71312284_10156807096617921_5550140826484473856_n.jpg (212.64 KiB) Viewed 6397 times

Posted: **Thu Oct 03, 2019 8:57 pm**

Beefy!

Posted: **Fri Oct 04, 2019 1:09 pm**

Hobbawobba wrote: ↑Thu Oct 03, 2019 8:57 pmBeefy!

smaller and lighter than a 9inch, apparently more efficient and possibly stronger or as strong... we will see

Posted: **Wed Oct 09, 2019 6:08 pm**

working on my mount designs....

Posted: **Wed Oct 09, 2019 6:28 pm**

Looks like you will made custom laser parts?

Posted: **Wed Oct 09, 2019 9:30 pm**

Nice 4 link mounts on solid works

Posted: **Fri Oct 11, 2019 12:37 pm**

spirit r wrote: ↑Wed Oct 09, 2019 6:28 pm Looks like you will made custom laser parts?

actually I will flowjet them out... pretty much the same thing.. same way I made my drop mounts

Posted: **Mon Oct 21, 2019 6:03 pm**

little garage fun

https://photos.app.goo.gl/3v2Zn35inmUyEqcu6

www.RX7fb.com

84GSLSE 13BREW Swap build

Re: 84GSLSE 13BREW Swap build

Re: 84GSLSE 13BREW Swap build

Re: 84GSLSE 13BREW Swap build

Re: 84GSLSE 13BREW Swap build

Re: 84GSLSE 13BREW Swap build

Re: 84GSLSE 13BREW Swap build

Re: 84GSLSE 13BREW Swap build

Re: 84GSLSE 13BREW Swap build

Re: 84GSLSE 13BREW Swap build

Re: 84GSLSE 13BREW Swap build