Page 4 of 9
Re: Limited Slip Diff
Posted: Mon May 28, 2012 11:21 am
by Brett
Looks like i can confirm that the Montrose rear end is roughly the same as a S1 Rx7.... so, where does that leave me?

Re: Limited Slip Diff
Posted: Mon May 28, 2012 12:16 pm
by kiwimazda
Swapping the whole lot out and putting in a S3 giving you discs on the rear and the use of Honda S2000 ratios
Re: Limited Slip Diff
Posted: Mon May 28, 2012 4:01 pm
by Brett
Got my eye on a S3 rear end courtesy of this forum

Also Mr Ramon gave me a few suggestions, (and a massive surge of jealousy) on Saturday morning
The flying turn will run this year, even if I have to walk it up the strip!

Re: Limited Slip Diff
Posted: Mon Jun 25, 2012 12:03 pm
by Brett
Hmmmm, starting to run out of time before God of The Pod/Rotorstock... any ideas what will fit in an S1 housing?

Re: Limited Slip Diff
Posted: Mon Jun 25, 2012 3:39 pm
by TOOL
Brett wrote:Hmmmm, starting to run out of time before God of The Pod/Rotorstock... any ideas what will fit in an S1 housing?


Re: Limited Slip Diff
Posted: Tue Jun 26, 2012 10:43 am
by Brett
Was that a "re-read the thread" because I've missed something obvious?
Re: Limited Slip Diff
Posted: Tue Jun 26, 2012 10:55 am
by TOOL
Yes. Your question was answered on Exile. You need a 24 spline diff.
Everything you want to know is here:
http://www.ausrotary.com/viewtopic.php?f=16&t=2695
Re: Limited Slip Diff
Posted: Tue Jun 26, 2012 1:54 pm
by Brett
I must be bloody blind - I only just noticed your reply on there!
Thanks for the link

Re: Limited Slip Diff
Posted: Fri Jul 13, 2012 1:17 pm
by TOOL
24 spline LSD with a 4.11 ratio for sale:
http://www.ausrotary.com/viewtopic.php?f=48&t=222409
£500 plus delivery from Oz

Re: Limited Slip Diff
Posted: Fri Jul 13, 2012 4:03 pm
by ian65