Page 5 of 5
					
				Re: ReSpeed rack & pinion conversion
				Posted: Thu Sep 12, 2013 10:27 pm
				by spoddy
				what about an electric pws steering rack?
any aftermarket kits that would suit the fb?
			 
			
					
				Re: ReSpeed rack & pinion conversion
				Posted: Thu Sep 12, 2013 10:47 pm
				by DB RX63
				I am thinking about using a power steering rack, without power, cos it has higher ratio's generally.
			 
			
					
				Re: ReSpeed rack & pinion conversion
				Posted: Fri Sep 13, 2013 7:56 am
				by RamoNZ
				Very early FCs came without, all the rest NA and turbo alike had PAS.
			 
			
					
				Re: ReSpeed rack & pinion conversion
				Posted: Sun Mar 02, 2014 2:44 pm
				by Arvika
				I have plans of using a Opel (vauxhall) Corsa C electrical power steering rack.
Have any of you tried that in a Rx7?

 
			
					
				Re: ReSpeed rack & pinion conversion
				Posted: Sun Aug 10, 2014 3:29 pm
				by aris_rx7
				some like this;;;;;;;;
https://scontent-b-lhr.xx.fbcdn.net/hph ... 8546_n.jpg
I made 2 months ago but I have not yet installed in the car, because I completely rebuilt the body.
 
			
					
				Re: ReSpeed rack & pinion conversion
				Posted: Thu Aug 21, 2014 9:50 pm
				by DB RX63
				Good Idea that, I think I would still prefer to go with a steering rack for the rally car, but for a road car it's perfect I think.
			 
			
					
				Re: ReSpeed rack & pinion conversion
				Posted: Fri Aug 22, 2014 3:28 am
				by re japi
				What I have heard is that Corsa´s steering rack is very good for that money. Easy to get and easy to install. Here they are very common to use in rallycross cars and so on. Also -02 Toyota Corolla´s steering rack is good.
			 
			
					
				Re: ReSpeed rack & pinion conversion
				Posted: Fri Oct 24, 2014 5:30 pm
				by DB RX63
				Chaps, 
Just to get this one current again, I have been looking into all things rack and pinion for my FB rally car.
I found this :
http://www.flamingriver.com/index.php/p ... 005/FR1520
Which might mean that you could use the RE Speed kit with a Mustang RHD rack?
I'm not sure why they think this would be so difficult.
What thinks you all?
Not the way I am inclined to go as I need the rack behind the wheels for a number of reasons.
Cheers 
DB
 
			
					
				Re: ReSpeed rack & pinion conversion
				Posted: Sat May 02, 2015 3:43 am
				by Kirkosaki
				Hey Everyone! 
I was wondering if this Rack and pinion setup is available anywhere to buy? 
I know RE-speed used to make these, but the site has been down and it doesn't seem like it'll ever come back.