Page 1 of 1
new member
Posted: Fri Jun 07, 2013 9:48 pm
by stewie
Hello. This is Stewie from Portland, Oregon, USA. I am going to look at my possible first rx7. I will but it if it doesnt have too much rust. Thanks for letting me in!!!!!!
Re: new member
Posted: Fri Jun 07, 2013 10:07 pm
by myatt1972
Welcome Stewie,
Good luck with the possible new purchase, there is a "where to find the rust" guide here
viewtopic.php?f=26&t=36 well worth a read before you view a car.
Re: new member
Posted: Sat Jun 08, 2013 12:19 am
by codge
hi Stewie, welcome from me.
Codge
Re: new member
Posted: Sat Jun 08, 2013 2:27 am
by stewie
Well, I had a look and the rust seemed manageable, so I will pick it up tomorrow on a trailer. Car is an 85 base model, no AC, no sunroof, no power windows, and a 5spd. White paint will rub out and interior is nearly flawless, 116K, no modifications at all. BUT, it doesnt run. Since I know nothing about rotarys, and this is my first rx7, I will have to rely on all you good people for advice. Will read posts on the site and glean all I can!