Hi to all,
First post to introduce myself:
Currently restoring 1985 FB with large bridge ported 12a engine as car has stood for 19 years and needs TLC with the aim of having it on the road for the summer.
I used to race an RX3 back in the early 80's with the Duckham's road saloons. Then made a decision to abandon rotaries and go into Pre-74 FF1600 racing.
Now I'm nearly back to where I started, with a rotor motor.
Just finished a front brake upgrade and now have Renault clio cup discs and 4 pot brembo calipers. Rear calipers now rebuilt and ready to go on.
Happy to share picture should anyone want to see them.
Cheers.
Ally.
Hi there
-
DKWW2000
- VIP User
- Posts: 1625
- Joined: Sun Jul 06, 2014 10:16 pm
- Location: English Riviera - South Devon
- Has thanked: 183 times
- Been thanked: 188 times
Re: Hi there
Welcome to the Forum, looking forward to seeing your photo's (of the car, not your holidays 
) as seems a interesting build,
regards Pete
) as seems a interesting build,regards Pete
RX7 FB S3 - RX7 FC TII Vert
Rotaries Previously Owned:-
2 x NSU Ro 80s - 2 x S2 RX7s - Suzuki RE 5 - DKW(Hercules) W2000 - Norton (Krauser) Commander
Rotaries Previously Owned:-
2 x NSU Ro 80s - 2 x S2 RX7s - Suzuki RE 5 - DKW(Hercules) W2000 - Norton (Krauser) Commander
-
TOOL
- VIP User
- Posts: 2598
- Joined: Thu Sep 01, 2011 10:30 am
- Location: Switzerland
- Been thanked: 24 times
Re: Hi there
Welcome. Sounds good so far.
Cos no one else said it..... Pics of the RX3 as well please!
Plenty of advice and parts on here if you need it.
Cos no one else said it..... Pics of the RX3 as well please!
Plenty of advice and parts on here if you need it.
Back in the UK for the summer, maybe longer......
-
Broadside63
- Posts: 3
- Joined: Tue Feb 10, 2015 3:38 pm
- Location: Maldon Essex
Re: Hi there
Snetterton a long time ago. When it had a 'proper' chicane.
Being followed by Dave Shead and Trevor Griffiths.
Being followed by Dave Shead and Trevor Griffiths.
- Attachments
-
- Snetterton1.JPG (327.19 KiB) Viewed 6589 times
-
TOOL
- VIP User
- Posts: 2598
- Joined: Thu Sep 01, 2011 10:30 am
- Location: Switzerland
- Been thanked: 24 times
Re: Hi there
The RX3 looks great. Thanks for posting.
Do you know what happened to it?
What motor were you running and what mods did the car have?
Do you know what happened to it?
What motor were you running and what mods did the car have?
Back in the UK for the summer, maybe longer......
-
Broadside63
- Posts: 3
- Joined: Tue Feb 10, 2015 3:38 pm
- Location: Maldon Essex
Re: Hi there
My friend bought the car some time ago and he still has it today. I raced it with a 12a bridge port engine that I built years ago. Most of the rest of the car was standard, apart from front shock, springs and geometry.
My friend has now removed this engine and it now has a 13b with race peripheral port housings.
The car also has had the rear axle suspension modified with longer upper control arms. Cant wait to hear it run.
My friend has now removed this engine and it now has a 13b with race peripheral port housings.
The car also has had the rear axle suspension modified with longer upper control arms. Cant wait to hear it run.