www.RX7fb.com

Posted: **Fri May 27, 2016 4:44 pm**

Hi,

Just thought i would post up the results of my rear caliper refurb, the piston on the rear left was sticking and on inspection both boots were torn.... This cost me £22.

I'll let the photos do the talking and link to the guide i used.

Rich

Linky...

http://www.rx7club.com/1st-gen-archive- ... rs-855449/

: 20160513_103444-400x767.jpg (70.39 KiB) Viewed 16838 times

: 20160513_103448-400x767.jpg (69.3 KiB) Viewed 16838 times

: 20160513_103457-767x400.jpg (63.48 KiB) Viewed 16838 times

Posted: **Fri May 27, 2016 4:46 pm**

: 20160526_130854-400x767.jpg (55.57 KiB) Viewed 16837 times

: 20160527_134738-767x400.jpg (62.4 KiB) Viewed 16837 times

: 20160519_130652-400x767.jpg (53.59 KiB) Viewed 16837 times

Posted: **Fri May 27, 2016 4:46 pm**

: 20160527_134732-400x767.jpg (69.2 KiB) Viewed 16837 times

Posted: **Fri May 27, 2016 7:47 pm**

I hadn't seen that link before. Thanks! I recently had one of those Mazda rear brake rebuild kits arrive with a bunch of other bits from Atkins. Haven't gotten around to rebuilding them yet though

Posted: **Fri May 27, 2016 7:57 pm**

Its simple enough, the hardest part is removing the rust.... But a food dose of citric acid does that job easily

Rich

Posted: **Fri Nov 01, 2019 7:14 pm**

Going through my favourites on Google Chrome and found a useful link for rebuilding rear brake calipers aye. I'll post it here for if anybody needs it in the future

http://rx7.pw.cx/guides_manuals/myguide ... ebuild.pdf

www.RX7fb.com

DIY Brake refurb

DIY Brake refurb

Re: DIY Brake refurb

Re: DIY Brake refurb

Re: DIY Brake refurb

Re: DIY Brake refurb

Re: DIY Brake refurb