Hello another new member

chrisj · Post by **chrisj** » Wed Oct 14, 2015 7:57 pm

Hi Folks,
Came across your forum whilst looking for FB rims. So thought I would sign up and introduce myself.
While I was having coilovers fitted to my FC vert at Silver Fern Performance. I asked the owner Dwayne, what he was doing with the Yellow FB sat in the corner. Cut a long story short. I’m now the proud owner of a series 3 FB in Ferrari yellow. All be it without an engine.
So my long term project has begun. I’m currently intending to turn it into a road legal track car. (It’s already stripped out for track use.)

Chris

chrisj · Post by **chrisj** » Thu Oct 15, 2015 7:38 am

A few initial photos attached. I hope

chrisj · Post by **chrisj** » Fri Oct 16, 2015 2:58 pm

Trying again the photo bucket way

codge · Post by **codge** » Fri Oct 16, 2015 11:53 pm

Hi Chris, welcome.

The inevitable question.....can you give me a reg so that I can get a fix on the car for the Forum register?
PM if you don't want it to appear on air.
Cheers
Codge (Dave).

chrisj · Post by **chrisj** » Sun Oct 18, 2015 9:06 am

Hi Dave,

Reg is C840RMY. The previous owner is based in North Wales so I suspect the car is the SORN custom yellow track car under Wales on the location register. Hope this helps

Chris

myatt1972 · Post by **myatt1972** » Sun Oct 18, 2015 10:58 am

Cool car Chris, what are you planning for under the bonnet ?

chrisj · Post by **chrisj** » Sun Oct 18, 2015 11:39 am

Hi Keith,

I'm putting a 12a back in her. The engine has now been rebuilt with the benefit of a half bridge port. The engine is currently being installed back in the car and should be ready for here first run next week.

Chris

codge · Post by **codge** » Sun Oct 18, 2015 11:47 am

chrisj wrote:Hi Dave,

Reg is C840RMY. The previous owner is based in North Wales so I suspect the car is the SORN custom yellow track car under Wales on the location register. Hope this helps

Chris

Yep, that's the one Chris. Moving location now to Cheshire.
Many thanks for that.
Dave

myatt1972 · Post by **myatt1972** » Sun Oct 18, 2015 9:56 pm

chrisj wrote:Hi Keith,

I'm putting a 12a back in her. The engine has now been rebuilt with the benefit of a half bridge port. The engine is currently being installed back in the car and should be ready for here first run next week.

Chris

Exciting stuff Chris, keep us updated and will you be making use of that weber shaped hole on the bonnet ?

chrisj · Post by **chrisj** » Mon Oct 19, 2015 5:33 pm

I will indeed, there is a 51 IDA already bolted on. I will post the build pictures via a project post later in the week when I get back to my pc

www.RX7fb.com

Hello another new member

Hello another new member

Re: Hello another new member

Re: Hello another new member

Re: Hello another new member

Re: Hello another new member

Re: Hello another new member

Re: Hello another new member

Re: Hello another new member

Re: Hello another new member

Re: Hello another new member