Project R - C983YNC

Hobbawobba · Post by **Hobbawobba** » Sat Jun 18, 2016 11:54 am

Looks awesome. Wish my welding was coming along so quickly!

Daytona-Dave · Post by **Daytona-Dave** » Tue Jun 21, 2016 4:07 pm

Just a quick update on the oil pressure , i fitted a tester and all seems to be OK, thanks for all the replies on this.

VID_20160621_150334 by Daytona Dave,

Daytona-Dave · Post by **Daytona-Dave** » Fri Jul 01, 2016 10:53 pm

Thought i'd make a start on the good side

no such luck it's actually worse than the n/s

the rest of the floor seems OK so on wards and upwards i'll just keep plugging away and it'll all come out in the wash. need to get it sorted for the MOT and on the road

Daytona-Dave · Post by **Daytona-Dave** » Thu Sep 01, 2016 6:07 pm

MOT done today so i can now get it on the road just in time to take my daily off to get some repairs done after my last sprint of the year on the 10th.

spirit r · Post by **spirit r** » Thu Sep 01, 2016 6:25 pm

Daytona-Dave wrote:Just a quick update on the oil pressure , i fitted a tester and all seems to be OK, thanks for all the replies on this.
VID_20160621_150334 by Daytona Dave,

How much oilpressure @ idle 750 U/min warmed up engine?
Your picture show us "zero". So you have to clean your oil pressure sensor ?

Daytona-Dave · Post by **Daytona-Dave** » Thu Sep 01, 2016 6:55 pm

spirit r wrote:
Daytona-Dave wrote:Just a quick update on the oil pressure , i fitted a tester and all seems to be OK, thanks for all the replies on this.
VID_20160621_150334 by Daytona Dave,
How much oilpressure @ idle 750 U/min warmed up engine?
Your picture show us "zero". So you have to clean your oil pressure sensor ?

The link on the right is to a video the pic is before warm start

Daytona-Dave · Post by **Daytona-Dave** » Thu Sep 01, 2016 7:02 pm

looks like she's being standing around a lot for the last 11 years

ian65 · Post by **ian65** » Thu Sep 01, 2016 8:32 pm

Well done on the mot Ray.. it's much easier once it becomes a rolling resto and you can legally drive it about. Yeah, it's been standing about a bit but looking at the mot history it's only failed on track rod ends and windscreen washers in the last 11 years so that's pretty good really. Enjoy putting some miles on it

Hobbawobba · Post by **Hobbawobba** » Fri Sep 02, 2016 6:18 pm

Wicked! Got some catching up to do for all those years hardly moving

Daytona-Dave · Post by **Daytona-Dave** » Sat Sep 03, 2016 6:48 pm

ian65 wrote:Well done on the mot Ray.. it's much easier once it becomes a rolling resto and you can legally drive it about. Yeah, it's been standing about a bit but looking at the mot history it's only failed on track rod ends and windscreen washers in the last 11 years so that's pretty good really. Enjoy putting some miles on it

Yeah that's the idea hopefully just creep and go with the body work, taxed today so first run out it's safe to say i won't get done for speeding

www.RX7fb.com

Project R - C983YNC

Re: Project R

Re: Project R

Re: Project R

Re: Project R

Re: Project R

Re: Project R

Re: Project R

Re: Project R

Re: Project R

Re: Project R