The way to get a Rx-7 FB Spirit R 1984

spirit r · Post by **spirit r** » Sun Mar 17, 2019 8:29 am

Thank you Dave for the inspiration. That fuses works fantastic.

: 20190525_083743.jpg (206.4 KiB) Viewed 5356 times

: 20190525_084341.jpg (150.65 KiB) Viewed 5356 times

spirit r · Post by **spirit r** » Sat May 25, 2019 4:26 pm

Today finished my new and rust free moonroof mounts. Someone was making deep scratches in the glass so i built a more modern looking mount. More big so you cannot see the scratches anymore.

: 20190523_200229.jpg (163.31 KiB) Viewed 5354 times

: 20190525_164828.jpg (148.05 KiB) Viewed 5354 times

A7RXY · Post by **A7RXY** » Sat May 25, 2019 4:57 pm

Thomas are you going to make these to order ...

PS they look great.
Dibs

Hobbawobba · Post by **Hobbawobba** » Sat May 25, 2019 8:02 pm

Nice touch there! Looking good. I keep meaning to machine some up, but have been so busy

spirit r · Post by **spirit r** » Mon May 27, 2019 4:19 pm

A7RXY wrote: ↑Sat May 25, 2019 4:57 pm Thomas are you going to make these to order ...
PS they look great.
Dibs

Depends on what you like to pay

Stainless steal and laser cut! I will ask my friend making a small production run then!

DKWW2000 · Post by **DKWW2000** » Mon May 27, 2019 7:25 pm

They look great Thomas better than new

GwarnGwarn · Post by **GwarnGwarn** » Fri Apr 17, 2020 5:22 pm

spirit r wrote: ↑Wed Oct 08, 2014 3:11 pm Got today my Parts for modify the oil metering pump.
SV101096.JPG
SV101094.JPG

Hi Thomas,

How have you found the RA OMP? Have you premixed as well? Last question (promise), does the 13B adaptor fit to the 12A direct?

Thanks,
Craig

Threesevens · Post by **Threesevens** » Fri Apr 17, 2020 5:44 pm

Hi Thomas,
Just followed your thread from the beginning.
Some fantastic work coupled with skill and determination.
What a car you have produced and still improving.

ian65 · Post by **ian65** » Fri Apr 17, 2020 6:31 pm

Threesevens wrote: ↑Fri Apr 17, 2020 5:44 pm Hi Thomas,
Just followed your thread from the beginning.
Some fantastic work coupled with skill and determination.
What a car you have produced and still improving.

German engineering and quality control. s(c)

If I was a multi-millionaire, wanted a full nut and bolt rebuild on a 1st gen and money was no object, I'd ship it to Thomas in Germany and pay him to do it for me....unbeatable attention to detail and quality of finish.

spirit r · Post by **spirit r** » Sat Apr 18, 2020 9:37 pm

GwarnGwarn wrote: ↑Fri Apr 17, 2020 5:22 pm
Hi Thomas,

How have you found the RA OMP? Have you premixed as well? Last question (promise), does the 13B adaptor fit to the 12A direct?

Thanks,
Craig

I never was going the premixed route and i am happy with the adapter for the 12A frontcover from
Real World Solutions - RotaryAviation.com | 5500 NW 72 Way | Bell, FL, 32619 US
support@rotaryaviation.com | 813.422.2733
The 13 B adaptor and the renesis adapter are different ones. Visit the homepage https://www.rotaryaviation.com/store/c1 ... ducts.html
@ Ian that was nice how you say this, it's like a
ultimate accolade for me.

www.RX7fb.com

The way to get a Rx-7 FB Spirit R 1984

Re: The way to get a Rx-7 FB Spirit R 1984

Re: The way to get a Rx-7 FB Spirit R 1984

Re: The way to get a Rx-7 FB Spirit R 1984

Re: The way to get a Rx-7 FB Spirit R 1984

Re: The way to get a Rx-7 FB Spirit R 1984

Re: The way to get a Rx-7 FB Spirit R 1984

Re: The way to get a Rx-7 FB Spirit R 1984

Re: The way to get a Rx-7 FB Spirit R 1984

Re: The way to get a Rx-7 FB Spirit R 1984

Re: The way to get a Rx-7 FB Spirit R 1984