FC Parts Clearout - Some new, some used

Got some parts to sell... post them here...
Post Reply
rotarypower
Posts: 160
Joined: Thu Dec 06, 2018 7:16 pm
Has thanked: 57 times
Been thanked: 37 times

FC Parts Clearout - Some new, some used

Post by rotarypower » Tue Jan 14, 2020 8:47 am

So since I no longer have an FC I've got some parts to get rid of, had to deal with a few time wasters on FB so I thought I'd see if anyone on here wants them.

-- New --

Full set of KYB AGX Shocks Front & Rear, these include the bump stops, top mounts & covers, still new in the box. Great road setup when combined with RB springs (apparently, never got to try them)

£210 posted.
shocks.jpg
shocks.jpg (110.66 KiB) Viewed 1796 times
Energy suspension complete bushing kit, still new in the box all complete. (Black version)
£100 posted.

-- Used --
Have a pair of doors in red, some surface rust at the bottom lip but otherwise OK, complete with glass & motor, mirrors etc.
Hatch glass assembly & seal.
Power steering pump.
2 x NA Gearboxes
2 sets of back boxes, one MAZDA the other aftermarket (unknown)
1x Y Pipe

Various misc bits including a radiator, oil cooler, clutches & pressure plates, driveshafts, fan shroud, various NA engine bits.

Open to offers on any of the used stuff.
( I don't have the wings any more )
gearbox.jpg
gearbox.jpg (228.52 KiB) Viewed 1796 times

User avatar
richrx
VIP User
VIP User
Posts: 525
Joined: Thu Feb 14, 2013 9:46 am
Location: Glasgow
Has thanked: 28 times
Been thanked: 19 times

Re: FC Parts Clearout - Some new, some used

Post by richrx » Tue Jan 14, 2020 1:16 pm

Any idea if the suspension shocks and bushes will work on the convertible?

Also is there any difference between a turbo 2 wing and n/a?


I'm guessing the bits we're all for/from an N/A coupe?


Rich

rotarypower
Posts: 160
Joined: Thu Dec 06, 2018 7:16 pm
Has thanked: 57 times
Been thanked: 37 times

Re: FC Parts Clearout - Some new, some used

Post by rotarypower » Tue Jan 14, 2020 2:18 pm

The suspension is the same between all FCs I believe. Same for the bushes.
These shocks are manually adjustable so you just set them to the damping you want.

The wings are the same I think, but I don't know that one 100%, but as per my post I don't actually have the wings any more, just the doors.

All the bits originally from or for an N/A coupe. S4.

rotor_dude
Posts: 51
Joined: Fri Jul 19, 2013 9:53 am
Location: northern ireland
Has thanked: 0
Been thanked: 8 times

Re: FC Parts Clearout - Some new, some used

Post by rotor_dude » Tue Jan 14, 2020 6:28 pm

nb, there is a difference between series 4 and series 5 wing/guard/fender
the series 5 have an extra bit for the factory side skirts to bolt too

so you could use series 5 on a series 4,
just if using series 4 on a series 5, you have to weld some tabs for the factory side skirt mounts etc
These users thanked the author rotor_dude for the post:
richrx (Tue Jan 14, 2020 7:51 pm)
If it Aint a ROTOR !! It Aint a MOTOR !!

Rotorworks Automotive Garage - N.I
Mazda & Mazda KIWI Rotary Specialist
rotorworks.automotive.garage.ni@gmail.com
ebay - https://www.ebay.co.uk/sch/r.a.g-n.i/m. ... pg=&_from=

User avatar
richrx
VIP User
VIP User
Posts: 525
Joined: Thu Feb 14, 2013 9:46 am
Location: Glasgow
Has thanked: 28 times
Been thanked: 19 times

Re: FC Parts Clearout - Some new, some used

Post by richrx » Tue Jan 14, 2020 7:53 pm

It's probably the wing I'm most interested in... My s5 very doesn't have any side skirts :?

What you wanting for the wing?

Rich

rotarypower
Posts: 160
Joined: Thu Dec 06, 2018 7:16 pm
Has thanked: 57 times
Been thanked: 37 times

Re: FC Parts Clearout - Some new, some used

Post by rotarypower » Tue Jan 14, 2020 10:45 pm

I don't have the wing any more, as I said in the last two posts! :lol:
I bolted it back onto the FC when I sold it .

Its only in the pics because I'm too lazy to go and get a new photo.
Rich

rotor_dude
Posts: 51
Joined: Fri Jul 19, 2013 9:53 am
Location: northern ireland
Has thanked: 0
Been thanked: 8 times

Re: FC Parts Clearout - Some new, some used

Post by rotor_dude » Wed Jan 15, 2020 9:13 am

sorry to butt in again, cant edit my previous post

convertibles, dont all have factory side skirts

same as Series 5, GTR, dont have factory side skirts, like mine GRRRRRR :(
These users thanked the author rotor_dude for the post:
richrx (Wed Jan 15, 2020 8:02 pm)
If it Aint a ROTOR !! It Aint a MOTOR !!

Rotorworks Automotive Garage - N.I
Mazda & Mazda KIWI Rotary Specialist
rotorworks.automotive.garage.ni@gmail.com
ebay - https://www.ebay.co.uk/sch/r.a.g-n.i/m. ... pg=&_from=

rotarypower
Posts: 160
Joined: Thu Dec 06, 2018 7:16 pm
Has thanked: 57 times
Been thanked: 37 times

Re: FC Parts Clearout - Some new, some used

Post by rotarypower » Wed Jan 15, 2020 5:32 pm

Suspension bits have gone, just the doors and other parts left.
:thumbup:

User avatar
richrx
VIP User
VIP User
Posts: 525
Joined: Thu Feb 14, 2013 9:46 am
Location: Glasgow
Has thanked: 28 times
Been thanked: 19 times

Re: FC Parts Clearout - Some new, some used

Post by richrx » Sat Jan 18, 2020 12:14 pm

Any word on the wings? I sent a on...

Rich

Post Reply

Return to “Parts For Sale”