Engine Mountings & Plate

[DKWW2000]

I want replace my engine mountings & paint the mounting plate. I want to do this with the engine in place but do not have a hoist.
I am hoping to be able to do this by supporting the front of the gearbox with a jack & by placing a piece of timber under the front of the sump also supported by a jack.
Will the sump be man enough?
Or any better suggestions.

[spirit r]

Hi Pete,
I am do this by supporting the front of the gearbox with a jack & by placing a piece of timber under.
Position is exactly under the red cross. take off the rubber before.

SV100439.JPG (198.33 KiB) Viewed 14149 times

[DKWW2000]

Sehr veilen Dank Thomas....und Mororolwanne auch?

Thanks...& the sump?

[spirit r]

Sehr vielen Dank Thomas....und Motorölwanne auch?

Thanks...& the sump?

Nein Pete macht nur dellen in die Ölwanne.
No Pete making dent in the sump.

[gt_james]

My 13B is sat on it sump, the weight of the engine should't really bend the sump.

[codge]

If it's on a floor it's a bit of a secure spread loading on the sump, the sides give support as well.
With a jack and timber it's probably more point loading or loading in the centre of the sump?