Fly wheel nut

[ian65]

How do I do this up tight without a 54mm socket???

[DKWW2000]

I used a De Walt 18 V Impact Gun, takes them off on the middle setting. I can not remember the Torque but it is more than ample

[ian65]

I used a De Walt 18 V Impact Gun, takes them off on the middle setting. I can not remember the Torque but it is more than ample

I've got a gun Pete and a big breaker bar but no 54mm socket to go on them... can't think of another way to tighten it up... I loosened it with a cold chisel

[DKWW2000]

Do you need in a hurry....I could send tomorrow? Or a large set of Stilsons

[spirit r]

I used a De Walt 18 V Impact Gun, takes them off on the middle setting. I can not remember the Torque but it is more than ample

I've got a gun Pete and a big breaker bar but no 54mm socket to go on them... can't think of another way to tighten it up... I loosened it with a cold chisel

Cut the conture out of a steel plate and weld it on the breaker bar!

[Hobbawobba]

I have one you can borrow if you're down this way anytime soon aye bro. It's a 1" drive I think

[ian65]

I have one you can borrow if you're down this way anytime soon aye bro. It's a 1" drive I think

Thanks Jesse... I'm sorted now.... Pete's dropped his in the post for me so I can torque it up and post it back to him When the autojumbles start again I'll have to buy my own.

[mooragerx7]

I got mine off eBay Ian think it was about £25 posted on a 1" drive

[spirit r]

I got mine off eBay Ian think it was about £25 posted on a 1" drive

New expert quality in uk amazon £30,70 in german amazon £ 25 postet. Price in uk seems high in that moment

20201009_174250.jpg (27.39 KiB) Viewed 15051 times

[TOOL]

Fwiw, 55mm socket works just as well at half the price.